| 1. | The explore of the fabricating process for the fastening part made of 0cr18ni9 material
9材料紧固件制作工艺探讨 |
| 2. | Solution and precipitation of chromium carbide during the fabricated process of cr7c3 ni3al composite
复合材料制备过程中碳化铬的溶解再析出行为 |
| 3. | The fabricating process of frp package cases with outstanding flame - retardant and antistatic properties are investigated in this paper
本文采用在树脂中添加抗静电剂及阻燃剂的方法,应用rtm工艺制备具有抗静电阻燃性能的frp包装箱。 |
| 4. | Based on studying the fabricating process and mechanical properties of sicp / al composites , necessaries of nondestructive testing on sicp / al composites are presented in this paper
本文在研究sicp al复合材料制备工艺和力学性能的基础上，提出了进行无损检测的必要性。 |
| 5. | In this paper , we design and fabricate several kinds of pmoled , and we explore and optimize the fabricating process . at the same time , we investigate the performance of the pmoled
本文设计和制作出了几种结构的器件，并对器件的制作工艺做了一些探索和优化工作，对方案的可行性和实用价值做了对比和评论。 |
| 6. | Meanwhile , the paper gives a detailed discussion on the coupling principles and also the fabricating processes of these three traditional fiber couplers . the hf etching method to fabricate the coupler is studied
同时,本文还具体介绍了上述三种传统的光纤耦合器制作方法,即熔融拉锥法、氢氟酸腐蚀法和边研磨法制作光纤耦合器的原理以及制作工艺。 |
| 7. | The research of microelectromechanical filter design theory 、 miniaturization 、 fabricate process , has benefits , and found theoretical and technical base for improvement of microelectromechanical filter field theory in micro - scale and integrated fabrication
本论文对微机械滤波器的设计理论,耦合理论,微型化工艺等方面做了有益的探索,为微机械滤波器集成化制造奠定了理论和设计基础。 |
| 8. | This thesis consists of three sections as follows : first , the preparation and characterization of porous anodic alumina . template is the effective tools for preparing nanowire arrays . in this dissertation , the fabricating process of aao template was discribed in details
多孔阳极氧化铝的制备和表征高度有序的纳米孔洞模板是制备纳米线阵列的基础，本文详细研究了高度有序的多孔阳极氧化铝模板的制备工艺。 |
| 9. | First several kinds of implementation of si - micromachined transmission line have been investigated . with different fabricating process , each transmission line has its different structure , and the insertion loss and operating frequency range are different . then we determined our objective
在大量文献调研的基础上，对硅衬底上制备微波传输线的方法进行了全面分析和总结，结合现有仪器设备和加工技术条件，确定研究目标。 |
| 10. | The characteristic of stirring equipment is used a shaking sieve to disperse the adding pure fe or fe203 powder and used a combined stirrer instead of a common paddle stirrer to improve the shear effect to mixing melts . the particularity of fabricating process is the step of holding stirring at a constant high temperature . both of which can improve the even distributing degree of reinforcement phase in pure al matrix
搅拌设备的特殊之处在于使用了振荡筛分散加入粉末和更换组合式搅拌器来提高对混合熔体的剪切效果，工艺的特别之处在于一定温度下的保温搅拌过程，这二者均能提高强化相在纯al基体中的均匀分布。 |
